Your options are fairly open since the old Savage/Stevens 200 LA stagger feed and the newer LA center feed's have the same hole spacing. The magazine well on an aftermarket stock for the stagger feed is usually a little bit larger than the well on the centerfeed stock. So you will have to do a little fitting work to properly position the detached magazine in the well to assuse proper feed. I did away with the L-clip. Then built a base for the magazine box with plumber's epoxy and used Velcro to hold in the correct position.
If your don't want to fool with the above, then Sharp Shooter Supply makes several laminated styles and Stockade Gunstocks makes several synthetic styles that are pre-fit for the Savage/Stevens 200 LA centerfeed. These are top notch stocks that are well worth the wait and cost.
Bookmarks