Results 1 to 5 of 5

Thread: 110-CL Upgrade

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-29-2016, 05:49 PM #3
    rkoeneke
    Guest
    Is it fairly safe to say the the barrel shank on this old rifle is 1.055" x 20tpi?

    The action is a 1st gen 110 short action, confirmed from the FAQ's, the ejection port is 3.275" and the action screws are 4.522" apart.

    I also lied in my original post, the blind mag is not weld on. It is just on there real solid, and attached to the action not the stock.
    Last edited by rkoeneke; 03-29-2016 at 06:18 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Considering upgrade to 10T from 110
    By csrevenant in forum 110-Series Rifles
    Replies: 5
    Last Post: 01-08-2017, 11:38 AM
  2. Upgrade my mode 11 TP 22-250
    By Drewbobloo in forum 110-Series Rifles
    Replies: 0
    Last Post: 01-01-2016, 01:38 PM
  3. Rifle Upgrade Help
    By mdbs9337 in forum 110-Series Rifles
    Replies: 14
    Last Post: 02-28-2013, 01:00 AM
  4. Why do you upgrade?
    By tonynoriega in forum Axis Series Rifles
    Replies: 11
    Last Post: 02-14-2013, 09:13 PM
  5. FP-10 Upgrade, by who??
    By holeshot308 in forum 110-Series Rifles
    Replies: 8
    Last Post: 12-27-2011, 03:28 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules