There shouldn't be any problems.
Dennis
I bought a used Precision TA (4.4" screw spacing) and it came without a trigger guard. Will this trigger guard sold by Midway work?
http://www.midwayusa.com/product/177...ough-116-matte
Thanks in advance for sharing your expertise.
Phil
There shouldn't be any problems.
Dennis
[B][SIZE=3]Dennis[/SIZE][/B]
If anything, it MIGHT be too thin where the trigger slides into it. Accutriggers are wider than the old standard trigger. You might be better off checking with the factory.
Bookmarks