Quote Originally Posted by wbm View Post
Yes. Have done a couple of conversions. You can either cut a notch for the center feed magazine clip in the stagger feed stock....I used a Dremel tool...or fit the center feed magazine in the stagger feed stock so that it is set at the correct height for proper feeding....this takes a bit more work and results in a "semi permanent" alteration....I did not like it nearly as well as cutting the notch in the stock. Had a "How To" with pics on the forum at one time but it is long gone....just tinker with it a bit and you will figure out the best way for you.
I think he's going the other way. Putting a stagger feed in a centerfeed stock. It already has the notch that won't be needed.