Who was the vendor?
I didn't want to wait or pay more for aftermarket stocks from the vendors that I found. So, I found I website that
offered pillar bedded Savage stocks. Both stocks are blind mag. First pic is of my 308. I had to do a little inlet work on it for around the safety and bolt release, but that was maybe a total of 10 minutes. Stock was $60 with shipping.
[img width=600 height=450]http://img94.imageshack.us/img94/1975/pict0125q.jpg[/img]
This pic is of my 30-06 that picked up off of gunbroker for $204. The stock was a drop in fit, love the finish on it, has the ebony tip.
The trigger guard is on its way. The plastic doesn't fit the hole. This stock was $85 with shipping.
[img width=600 height=450]http://img15.imageshack.us/img15/4412/pict0126o.jpg[/img]
Who was the vendor?
Frank
One rifle, one planet, Holland's 375
Numrich Gun parts
great service...pretty cheap shipping
I love these stocks...I searched Numrich and had too many returns with unclear descriptions to find them...what did you put in the search engine to find these?
Thanks,
Jerry
http://www.gunpartscorp.com/catalog/...px?catid=12160
That should take you right to the stock page, then click on savage
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
http://www.gunpartscorp.com/catalog/...spx?catid=5154
this link is for savage rifles, they are on the left.
Just search through the different variations, easier if you set it to display 100 items at a time after click on say model 116
sorry it took me so long to respond
Pc, were your 2 stevens rifles the older 4.2 spacing staggered fed or the new design with the 4.4 spacing and center fed?
they are the old center fed
Bookmarks