Yes. A $300 Savage is a $300 savage. Even if it has Stevens stamped on it, or they charge $700 for it.
Hey everyone, new to the forums here. I'm sure this question has been asked before, but I couldn't find anything in the search.
Finding custom or aftermarket parts for the 200 are pretty rare, but I've heard that parts for the savage 10 or 110 are interchangeable with the Model 200. Is this true?
Thanks for your time.
-Matt
Yes. A $300 Savage is a $300 savage. Even if it has Stevens stamped on it, or they charge $700 for it.
I'm a firm believer in the theory that if it bleeds, I can kill it.
Yes they are the exact same.
Thanks guys. Just to make sure, say I bought a stock for a 110, would it fit my 200?
As long as you match short/ long action, ( I would just measure screw spacing to be sure) and stagger feed/center feed. And small/large shank.
The barrel
....Alright, again with this. There is an expression, RTFM; we need one for the FAQ, RTFF.
Top left of this page, under the pretty picture, click on the "Home" button.
Once that page loads, scroll down slightly, and against the left edge of the page; click on the "Savage FAQ's".
Then you get a sub directory choice. Choose "Centerfire FAQ's".
There are three pages of FAQ's. You would do well to read them all..... Hint-hint. But the specifics needed to answer every question on this thread, are on page 3.
I'm a firm believer in the theory that if it bleeds, I can kill it.
Bookmarks