My rifle started out as a 110 package gun. The provided bases are decent but the rings are not. Had good luck using the factory bases and Burris signature z rings. What bugged me was that the weaver style bases hang over the receiver. Eventually switched the two piece base/rings to talley lightweights and wish I did it sooner. Less to come loose and a very simple, clean look. Best setup in my opinion as I don't like one piece rails, but there is nothing wrong with them and plenty of guys swear by them. optic mounts won't improve the strength of a receiver and the receivers are plenty strong, so I'd just go with whatever you like. Long winded response but my advice would be to swap out at least the rings.
Bookmarks