Results 1 to 25 of 33

Thread: Neck turning

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-26-2016, 06:46 PM #10
    LongRange
    Guest
    Quote Originally Posted by schnyd112 View Post
    I will try again tonight, with higher rpms, and see if that helps. If not I will probably call to set up a tutoring session. I could be being too picky, but the videos I have seen make it look to easy to screw up. Granted they all have built stands to both the drill and the tool.
    yeah i think so but try turning just a bit faster and feed and pull slower...you want the tool and or drill to float so dont try to hold it stiffly just kinda let it do its thing.

    Quote Originally Posted by Robinhood View Post
    How much clearance between the turning mandrel and the case neck?
    he needs right at 0.014 to 0.0145 so the necks will equal .293 when loaded...hes running a tight neck(.296)chamber 260rem...hes worse of a perfectionist than me i think LOL!
    Last edited by LongRange; 01-26-2016 at 06:56 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Neck Turning?
    By Jayhawker in forum Ammunition & Reloading
    Replies: 14
    Last Post: 09-10-2018, 06:26 PM
  2. Neck turning ?
    By Hammer in forum Ammunition & Reloading
    Replies: 8
    Last Post: 02-04-2014, 09:11 PM
  3. neck turning for 260?
    By simplerider in forum Ammunition & Reloading
    Replies: 9
    Last Post: 02-28-2013, 10:16 PM
  4. Neck Turning
    By fgw_in_fla in forum Ammunition & Reloading
    Replies: 11
    Last Post: 09-10-2012, 04:38 PM
  5. 243 ai neck turning
    By drumgool in forum Ammunition & Reloading
    Replies: 9
    Last Post: 06-26-2010, 01:49 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules