I believe the Savage Stevens 200 SA models were all center feed (4.40"). The blind magazine box and follower stay with the stock and are held in place by an L-clip when the stock is removed. The Stevens 200 actions were all top bolt release. If you want to go with the Savage OEM bottom metal parts in a Boyd's Savage SA (10, 11, 12, 14, 16), top/side bolt release and DBM inlet, then you will need an old style trigger guard with the thin front lip, the frame assembly (surround) with the thicker rear lip and a metal bottom magazine cap. Go to www.SavageArms.com, Store tab, Partfinder tab and put in the following rifle SN G800911. That will pull up the schematics for a rifle with the Savage OEM bottom metal parts (black matte) needed to convert a Savage (10, 11, 12, 14) or Stevens 200 SA, TBR, CF with blind magazine stock to a CF, TBR, DBM stock.
Bookmarks