You're overthinking the non problem. The chances of damaging the firing pin spring by leaving it cocked, are slim and none.
uj
Hi all,
I am going to be storing my model 11 for a few months and will have an action lock through it. As such I can't close the bolt and decock it into battery.
I would like to store it decocked so that the firing pin spring is not under tension for months.
How to do this?
I assume I can back out the rear bolt assembly screw that begins the bolt dissasembly and once some spring tension is relieved (without fully removing it) I can lift and turn the cocking piece and let it drop into the fired postion?
Thanks
PS This rifle that I had accuracy iuuse with some months ago got a new scope (the Bushnell Legend failed), bedding and SSS trigger and now shoots well. Dropped an Alberta black bear with it 2 weeks ago.
You're overthinking the non problem. The chances of damaging the firing pin spring by leaving it cocked, are slim and none.
uj
if you are worred then decock the bolt &store seperate
Thats my plan, but how to decock, as with the current spring tension I cannot move the cocking piece.Originally Posted by drybean
Back off the BAS then decock. It's also the easiest way to re-cock.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
just push the button on bottom of the to fire
then to recock set button on a hard corner &push down
but the easy way is to cock it &pull the trigger
an leave the bolt in place
Ah, so true, but not with an cable lock through the action!Originally Posted by drybean
Millions all across the globe leave their rifles cocked all the time with nary a problem. Think of the old military rifles sitting in warehouses for 100 years that still function 100% when cleaned up a bit. Another alternative is to just get a trigger lock, that way you could leave the bolt in. They are cheap and effective.
-Dan
He wants the cable lock thru the action so it cant be used in advertantly. Ya know, Safety Precautions . So he cant pull the trigger to de-cock the bolt and achieve what he wants to.
I would just leave the bolt cocked while in storage cause it aint gonna hurt it, but if you really wanna de-cock it then you will have to back off the BAS as Geargrinder mentioned.
Just curious, how long do you plan on storing it without shooting it that you want the bolt de-cocked? I do agree with UJ though,that I really doubt it will damage anything by leaving it cocked.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Thanks pdog and meatgrinder, realistically it will be 8 months without shooting it. I will be in another country, hence all the safety precautions.Originally Posted by pdog06
Personally, I would pull the bolts, decock them manually, and store in a seperate, locked container. AND use a bore or trigger lock on the rifle(s).
Store rifles and bolts in seperate places.
meatgrinder? :DOriginally Posted by kayaker
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
LOL ;D sorry, wrote that in a rush...!Originally Posted by geargrinder
De-cocking is a waste of time. Even though the firing pin is in the "fired" position, there is still 20 lbs of compression on the spring. Leaving it cocked will hurt nothing.
"As long as there's lead in the air....there's still hope.."
That seems to be a common consensus. I would have thought it would strain the spring if left like that for months, but it seems not..Thanks!Originally Posted by sharpshooter
cheers
Don't forget to swap the firing pins out so the gun is inoperable in the event you are framed by the government.
(Sorry I couldn't resist. - refer to the movie/book "Shooter" for the punchline) ::)
Originally Posted by PBinWA
I was thinking the same thing! :D
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Bookmarks