Yes, that's all it takes.
A pushfeed WSM bolthead, WSM firing pin and barrel.
I have a Model 10FP in .308 cal. , I would like to convert it to a 7mm RSAUM. Can this be done by changing the bolthead to WSM , firingpin and, barrel? Thanks
Yes, that's all it takes.
A pushfeed WSM bolthead, WSM firing pin and barrel.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Geargrinder, thanks for the reply. Have any info on a good source for these parts?
SSS is the only retail vendor that I'm aware of that sells the WSM firing pin. They will have everything you need including the barrel.
Midway has the bolthead.
You could get the barrel from many sources. I got my 7mmWSM Shilen from Northlander. I've also had Sinman do a couple barrels that have turned out great.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Geargrinder, Sir thanks, Is Sinman and SSS one and the same?
http://www.sharpshootersupply.com/
Talk to them about the bolt head also. there have been some changes in the magnum heads and you may have to use a modified long action head for your long action.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
No, they are different sponsors here.Originally Posted by aimatit
Sinman is the screen name. He is the man behind Sin Arms.
SSS is Sharp Shooter Supply. They post under the Sharpshooter screen name.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
read's like hollywood ;D
Roll the credits!
uj
Bookmarks