Quote Originally Posted by hafejd30 View Post
I use exactly the same set up as well. Lee collet/forester seater. I'm around 10 firings on Lapua brass and have yet to worry about fl sizing. I have a Redding body die just in case. Runout is .002 or less for 95% of the rounds. Best combo in my opinion. I run Redding bushing die with forester seater on my 338 and it's great to but at a much higher cost. The lee collet die, plain and simple, just works great. I cam over on a rcbs rock chucker press.
Should also note I've used this setup for years on 308 and works well to. Never body sized that either