Originally Posted by
triehl27
I have an RCBS prep center that I still use occasionally. Most of my trimming is 223, 6x45, 300BO, 308, and 300WinMag.
223, 300BO, and 308 I do with a Giraud Triway trimmer. Trims, chambers and deburrs all in one press mounted trimmer. About $90ea caliber. extremely precise once setup. Perfect brass everytime as long as I do my part.
6x45, I use a custom Lee Quick Trim die and Powered Lee Quick trimmer. I have a write up on it. It trims, chambers and deburrs, but it not the same quality as the Girauds, it's good to .002 accuracy usually.
And same for 300 Winmag, I use a lee quick trim.
Once ea of these is setup there is no setup time other then switching them in the drill press. I have multiple secondary options for each, but they only flat trim, no chambering and deburr with is why I do keep the prep center.
I truly do like have my trimmers chamber and deburr all at the same time. 3 seconds vs 30sec+ going from station to station repetitively.
Bookmarks