Well, my 1907-17 M1 got lonely. So last weekend I bought another one, at a local auction. It's a 1907-10 M2, so it's got the Type 1 sear and no safety bar. Condition is very good outside and excellent inside. I'm having some issues with the trigger bar mating with the sear. Both pieces look almost unused. It dry fires okay but actual firing causes the trigger bar to move out of alignment with the sear. I'm thinking a sloppy reassembly job may be the culprit so I was verrwy, verrwy careful putting it back together this time. A quick trip to the range tomorrow morning will tell me if I fixed it or if I still have a problem.

Here it is along with the other old-timer I picked up, a H&R Self Loading 32 from 1919. The H&R works fine in spite of a mag safety kludge done by Bubba the Gunsmith, apparently many years ago. Shoots to POA at 50ft, even with its awful trigger.