Results 1 to 7 of 7

Thread: Hornady 30-06 Brass with Crimped Primers

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #6
    Basic Member scope eye's Avatar
    Join Date
    May 2008
    Location
    Sebring FL
    Posts
    2,795
    For those wondering, it does not bevel out the whole primer pocket all this does is remove the "lip" or overlapping brass. And gives it a nice small bevel so it makes it easier to seat the primers. I have also found that this method does not expand the primer pocket the way a swager does,
    I have one of those and I prefer my trim method.

    Dean
    Last edited by scope eye; 11-22-2015 at 09:18 AM.
    RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.

Similar Threads

  1. hornady brass
    By LongRange in forum Ammunition & Reloading
    Replies: 21
    Last Post: 09-17-2014, 10:18 PM
  2. Need Opinions- Once-Fired .223 LC / 7 Brass BAD Primers (?)
    By Silvercrow1 in forum Ammunition & Reloading
    Replies: 35
    Last Post: 11-07-2013, 03:13 PM
  3. 308 168gr AMAX, Varget, Federal brass, CCI primers.
    By missed in forum Ammunition & Reloading
    Replies: 16
    Last Post: 02-01-2013, 11:07 PM
  4. Crimped primers
    By cgeorgemo in forum Ammunition & Reloading
    Replies: 14
    Last Post: 04-18-2012, 04:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •