The easiest is to drop a 260 shell in it
I just bought an unmarked .260 barrel. The previous owner bought the rifle for the action. He was told by the guy he bought it from that it was a .260 narrel. The bore does measure .260 at the muzzle end. It looks like a factory 24" parkerized varmint barrel. It did have a thick coat of paint on it which I stripped off.
The issue is that it is not marked Savage or with a caliber anywhere.
Did Savage make unmarked barrels?
Could the markings have been sandblasted off before coating it?
How could I confirm the caliber before spending any more time $ on it? Can I just check it with a .260 round or brass?
Thanks.
The easiest is to drop a 260 shell in it
I'm a firm believer in the theory that if it bleeds, I can kill it.
A factory barrel would be marked unless it was sanded or turned off. The best way to make sure of the caliber is to do a chamber cast.
Bob
It's better to shoot for the moon and hit the fencepost than to shoot for the fencepost and hit the ground!
I checked today at my favorite shop. It does fit a .260 shell. The barrel was beadblasted prior to coating.Originally Posted by darkker
I see a nice build coming...
beadblasting wouldn't take the markings off unless it was painted or very lightly eched.
May have been an A&B barrel, they have no marks. or you may have something even better :)
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
It was definitely painted. I had to strip a lot of it off. It also needs the crown touched up. The crown and profile look a lot like a Savage factory varmint barrel. It is 24". The only markings are a "00" and a "T" just above the threads.Originally Posted by sinman
Any ideas?
Savage replacement barrels are not marked. They roll mark them after they are fitted to the receiver. Savage replacement barrels can sometimes be found at gun parts dealers. I had a .338WM barrel like that.
Aftermarket barrels like Brux, E.R. Shaw, Shilen, etc, will also be plain.
The best why to determine what you have is to get some Cerrosafe from Brownells and make a chamber casting. Just because a .260 cartridge fits doesn't necessarily make it a .260, might be a custom chamber.
Savage uses a roll mark, and it would take more than bead blasting or sanding to remove it. I would say you have a A&B barrel.
I just got a brand new Shilen in 260 and there are no markings.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
check on the breach end may be cal & twist markings
drybean
With the markings above the threads, it sounds like a Savage barrel. The barrels are marked with a caliber code of a letter , or sometimes 2 letters to designate caliber in production. The model and caliber is later roll stamped after the barrel has been proof tested.
This barrel most probably came from Steve Simons, a Savage parts dealer from Florida who is now out of business. He acquired a number of .260 barrels from the factory when they discontinued that caliber back in 2003. None of these barrels were installed at the factory, they were meant for replacement.
"As long as there's lead in the air....there's still hope.."
Thanks sharpshooter! Any idea what the twist would be?Originally Posted by sharpshooter
Steve still sells a few parts on ebay. emailed him a couple days age to see if he had a LH stock.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
The standard twist for the .260 was 1-8.
"As long as there's lead in the air....there's still hope.."
Thanks SSOriginally Posted by sharpshooter
Steve was who I bought my .338 WM barrel from.
Didn't Numrich's get a lot of his inventory when he retired?
Most of it.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks