Results 1 to 12 of 12

Thread: 300 SMK bullet Jacket Separation BA 110 338 Lapua

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-27-2015, 03:48 PM #4
    Mikeinfwa
    Guest
    Twist rate 1 in 9
    Speed 2750 - 2800 fps
    Brake is undamaged

    as for the 'failures'..... There is a distinctive pop sound with the bullet failing to reach target zone/area. Last time shooting I had 2 failures. I was shooting at 1000 yard steel and was able to see thru scope the bullet impacting the dirt about 300 yards from me.
    Last edited by Mikeinfwa; 09-27-2015 at 03:56 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Spent primer separation in brass?
    By Rick_W in forum Ammunition & Reloading
    Replies: 14
    Last Post: 09-10-2016, 12:35 AM
  2. Bimodal bullet pattern from Savage 110 HS 338 Lapua
    By rotts4u in forum 110-Series Rifles
    Replies: 28
    Last Post: 11-01-2014, 11:05 AM
  3. case separation
    By rjtfroggy in forum Ammunition & Reloading
    Replies: 12
    Last Post: 09-14-2012, 11:21 AM
  4. 167 grain 30cal. lapua bullet
    By gunpimp69 in forum Ammunition & Reloading
    Replies: 4
    Last Post: 04-28-2011, 07:18 PM
  5. Jacket separation with Hornady XTP
    By borg in forum Ammunition & Reloading
    Replies: 8
    Last Post: 10-25-2010, 11:26 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules