i believe you just remove the base plate off the mag you have and you are gtg, just use your mag and follower. you will have to add an L-clip to it so it says in the stock.
Bruce
I have a savage 111 in 300 win mag with a detachable center feed magazine and I was wondering if it's possible to change it for a blind center feed magazine? The reason I have a stock for a blind magazine. The blind magazine and follower are hard to find?
i believe you just remove the base plate off the mag you have and you are gtg, just use your mag and follower. you will have to add an L-clip to it so it says in the stock.
Bruce
Holy Crap!!
Devildog is exactly right, its a simple changeover. You do need the Lclip tho. Easy peezy.
Scooter
Actually you don't need the "L-clip" a little epoxy putty in each corner of the well done like bedding, or 1 or 2 thin wood shims on the sides and up front just enough to hold in place and you are good to go.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
Thanks a lot guys!
Buster95, I would trade you a Stevens 200 L/A stock with the blind magazine for a stock with a detachable, also in 300 winmag, if it would make it easier on you...
Bookmarks