I'm guessing that is Pa and not TX. Cause I could meet ya in Texarkana (about half way) and swap them for you.
So, I got some quotes to install a barrel onto my action, and it's pushing $100 which seems a bit out of line to me. Anyone in the Pittsburgh area willing to swap a barrel for me and function test the rifle? I'm fine paying a fee, but for $100 I'll buy a vise, wrench, and learn how myself. Barrel is 7mm RUM.
I'm guessing that is Pa and not TX. Cause I could meet ya in Texarkana (about half way) and swap them for you.
"And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)
Go ahead and buy the tools and headspace gauges. I have done it many times now. If I can do it any one can. Then you will be able to swap out barrels to your hearts content. Good luck
Call ER Shaw and see if they'll do it for you since they're local if no members from here are able to help you out. Nice bunch of guys at the machine shop and at the store front.
no luck ... tried that first.
Just a thought, but you have a gunwreaker school close by, http://www.pagunsmith.edu
Maybe one of the students would take the project on. Give'm a call, can't hurt.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
Wait a couple weeks and buy the tools
Big vice/barrel vice, barrel nut wrench, go headspace gage.
I used masking take over reciver and barrel by the barrel nut. I used a big pipe wrench to loosen nut, and bought an old style non smooth barrel nut So i can use the star patern barrel nut wrench. Easy peasy.
C'mon guys! There's GOT to be some one in the general area of Pittsburg, Pa. that can help this guy out ?????
Bookmarks