I had extraction problems with my 110BA for about 2 years. I sent it back to Savage 2 times and they worked on it, but did not fix the problem.
I bought a bolt head from Pacific tool (took 4 months to receive it), had is installed, check the head spacing, and compared the savage and the pacific bolt heads.
The savage was off in size from one side to the other about .02, the pacific was dead on, side to side.
I have run 200 rounds through the rifle since then and have not had 1 piece of brass fail to extract.
Some have said the Hornady Brass is too soft, for me it was a bolt head that was not made correctly.
Bookmarks