Results 1 to 25 of 57

Thread: H4831sc OCW...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #6
    LongRange
    Guest
    i seated 25 rounds at .025 off the lands(still playing with seating but .030 is looking best at this point)and shot them out at 330-425-550-and 650yds every round was on steel except the 2 i didnt change elevation for(im trying to get some vids uploaded to photo bucket but they dont want to go)...the elevation change was quite a bit from the H4350 load but the H4831 load is MUCH more predictable...my ammo was 70degs when i started shooting at distance and after 15 rounds i had my dopes dialed so i let my ammo sit in the sun and heat up...it was windy so it only made it up to 89degs and the only real change was at 650yds it shot about 3/4" higher than when it was 70degs...checked with a lazer temp gauge...and my wind holds are about 1 moa more out to 425 and about 2 moa out at 550 and 650yds...ill try and get the vids up...they are crappy Iphone vids but youll see what i mean by windy LOL.

    H4350 load elev.....H4831 elev
    650yds 10.25........11.5
    550yds 8.25..........9.25
    425yds 5.25..........5.75
    330yds 2.25..........2.75....these may drop by .25 moa because i think my 200yd zero is a little low now as well.
    Last edited by LongRange; 08-16-2015 at 03:34 PM.

Similar Threads

  1. Temp variations with H4831SC
    By stomp442 in forum Ammunition & Reloading
    Replies: 7
    Last Post: 04-05-2012, 02:31 PM
  2. Primers for H4831sc
    By kdvarmint in forum Ammunition & Reloading
    Replies: 6
    Last Post: 04-19-2011, 05:53 PM
  3. Compressed charges with H4831SC Rem .260
    By mugsie in forum Ammunition & Reloading
    Replies: 4
    Last Post: 12-18-2010, 01:26 PM
  4. H4831sc in a .243?
    By lostart in forum Ammunition & Reloading
    Replies: 4
    Last Post: 08-14-2010, 04:50 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •