Berger

[eddiesindian]

Agreed. Crap in crap out. I use the Berger program exclusively and it works really well for me. I find the most important thing to get right is your sight height. For most scopes with a 50mm objective that number is generally right around 1.8". I then use pressures based on altitude and the temp my truck says when I pull up to the range. So for me if I were to go to the range right now I would use a temp of 80 degrees and a pressure of 26.82 for an elevation of 3000 ft. Most of the time I am within a click or two of being centered up at any given range as long as my chrony gives me a reliable average velocity.

Thanks for the reply

Which projectile (VLD) do you use for there calculations?............ seeing as how you've used there site and there results have been correct then that's good news. I figured it would be seeing as how its there projectile that Im using and there ballistic data
I purchased a wrist watch made by Casio that has the ability of reading temp/altitude/baro pressure. Really shines when Im tossing rounds out past 800.