Results 1 to 11 of 11

Thread: another OCW test...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 06-28-2015, 10:44 AM #7
    LongRange
    Guest
    Quote Originally Posted by sixonetonoffun View Post
    Not to go to far off topic but...

    I find it of interest your using double base powder @100°F +- running near max loads without issue. That says something right there. Can't help but wonder if you would have to step to the next faster powder @40°F to achieve the same results? Or if the nodes are wide enough to be ok?
    I'm not sure but will find out when it starting cooling off here.

    As far as max loads with the RL-25 I'm not sure what it would be I just ran the numbers on quick load and chose 48.5gs as max but can't get that much in a case so I stepped down to 48.2gs...I'm out now and will post a pic of a 48.2g case in a few.
    Last edited by LongRange; 06-28-2015 at 11:03 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 204 OCW test
    By groundhogsniper in forum Member Builds & Range Reports
    Replies: 5
    Last Post: 02-28-2017, 05:55 PM
  2. 270 WSM ladder test
    By guhunter in forum Ammunition & Reloading
    Replies: 3
    Last Post: 03-21-2013, 01:35 AM
  3. Test bullets
    By rjtfroggy in forum Ammunition & Reloading
    Replies: 2
    Last Post: 12-04-2012, 07:34 AM
  4. ***LADDER TEST DONE NOW WHAT***
    By dwa in forum Ammunition & Reloading
    Replies: 28
    Last Post: 07-26-2011, 08:33 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules