Its nearly taken a year but have completed my build. The chassis and barreled action were cerakoted by DavTac, Shreveport La. Need to load up some rounds and go to the range.
I had searched for a considerable amount of time for a suitable stock or chassis for my 260 Rem build. The difficulty is/was that stocks/chassis are next to nil for intermediate actions with 4.522" center to center action bolt spacing.
I contacted Kyle with XLR and he was willing to cut a custom Evolution chassis. I received the chassis today in the raw as I will be Cerakoting the rifle.
The particulars of this build:
260 Rem Caliber
Savage Model 110c J series Intermediate Action,4.522" Center to Center action bolts
Sharp Shooter Supply Timed & Trued Action
Northland Shooters Supply Action Lug
Northland Shooters Supply Barrel Nut
Shilen 260 Rem select match 28" 1-8" barrel
Glades Armory Tactical Bolt
Rifle Basix Sav-1 trigger
XLR Industries Tactical Evolution Chassis 14" handguard, RH, DBM Setup
XLR Folding Stock Adapter
AICS 308 5 Round Mags
Burris XTR II 8-40x50mm Scope
Ken Farrell 1-Piece 20 MOA Steel Base
Badger Ordnance 34mm 1.49" Steel Rings
Work not yet completed:
Barrel Threaded, brake installed
Cerakote chassis and barreled action
Its nearly taken a year but have completed my build. The chassis and barreled action were cerakoted by DavTac, Shreveport La. Need to load up some rounds and go to the range.
Very nice...let us know how it shoots!
Very nice looks great!!!!!!!!!!!!!!!!!!!
Rifle looks great! Maybe its just the picture but your brake looks upside down.
Get that thing timed and take it to the range!
kyle is the man! xlr is an awesome company.
Nice rig! I want an Xlr as well, what colors of cerakote did you get? I really want the patriot brown
Looks freaking awesome. Not sure it matters, but typically, the wider scope ring is run up front and the thinner one in the rear, if I'm not mistaken.
Been doing some load development on the 260. Still have less than 300 rounds down range. Starting to zero-in on some decent bullet and powder combinations. The sierra 140GR MKs seem to be giving me the best results. Have some 139gr Lapua Scenars that I will be trying in the future.
great looking rig and some fine shooting. congrats on the nice build!
Bruce
Holy Crap!!
Tack driver. Nice rifle and fine shooting!
Load development continues. So far it looks like 37.0gr VihtaVuori N550 with 139gr Lapua Scenars is a sweet spot at .005" off the lands. Also 42.0gr IMR4831 with 140gr Sierra MKs .010" off the lands.
Savage Mdl 110C 260 Rem 28" 1-8" Shilen Lapua 139GR Scenar 4PL6018 Powder C.O.L. Start Max Most Accurate Group H4350 37.0 41.1 40.0 .598" IMR4831 37.0 41.0 40.5 .589" GoodToGo Viht N550 33.2 38.0 37.0 .386" Lot # Caliber Case Trim Length: Neck Bushing Headspace DL O.A.L. Ogive Primer Powder Type Charge IMR4831 260 REM Lapua 2.026" .291" 1.623" 2.250" BR2 IMR4831 40.5 H4350 260 REM Lapua 2.026" .291" 1.623" 2.250" BR2 H4350 40.0 Viht N550 260 REM Lapua 2.026" .291" 1.623" 2.250" BR2 Viht N550 37.0 Hornady 140GR AMAX Powder C.O.L. Start Max Most Accurate Group Untested RL-19 2.785" 38.1 45.1 IMR4831 2.785" 36.0 41.0 40.0 .504" H4350 2.785" 39.0 43.0 42.0 .669" Lot # Caliber Case Trim Length: Neck Bushing Headspace DL O.A.L. Ogive Primer Powder Type Charge IMR4831 260 REM Lapua 2.026" .291" 1.623" 2.820" 2.210" BR2 IMR4831 40.0 H4350 260 REM Lapua 2.026" .291" 1.623" 2.820" 2.210" BR2 H4350 42.0 Sierra .264 140gr MatchKing HPBT Powder C.O.L. Start Max Most Accurate Group Untested BL-C(2) 2.765" 34.0 36.6 Untested Viht N550 2.765" 33.2 38.0 IMR4064 2.765" 32.0 37.1 36.0 .458" H4350 2.765" 41.5 44.5 44.0 .700" IMR4831 2.765" 41.0 44.0 42.5 .379" IMR3031 30.0 32.5 31.500 .510" Lot # Caliber Case Trim Length: Neck Bushing Headspace DL O.A.L. Ogive Primer Powder Type Charge H4350 260 REM Lapua 2.025" .291" 1.623" 2.750" 2.243" BR2 H4350 44.0 H4831 260 REM Lapua 2.025" .291" 1.623" 2.750" 2.240" BR2 H4831 42.0 Berger 140GR Match BT Long Range Target Powder C.O.L. Start Max Most Accurate Group Untested RL-19 2.80" 38.0 42.5 Untested H4350 2.80" 37.0 41.1 IMR4831 2.80" 37.0 41.0 39.5 .401" Lot # Caliber Case Trim Length: Neck Bushing Headspace DL O.A.L. Ogive Primer Powder Type Charge IMR4831 260 REM Lapua 2.026" .291" 1.623" 2.265" BR2 IMR4831 39.5
Last edited by rbp75503; 09-24-2015 at 05:27 AM.
Hi i saw that you built your savage from a 110c j dont suppose i could buy you old take of parts as im trying to restore mine. And nice build very jelious hopefully i will build one that nice.
Last edited by Redhawkdown; 09-30-2015 at 08:41 PM. Reason: Forgot to add something
Bookmarks