Nice shooting there, Pdog! Yes, that is something I need to try and thanks for the tip. I did not shoot last weekend but will do so this week. I took my rifle apart and found some standing gun oil in the recoil lug area. It was enough that required a few cotton swabs to remove. Not sure if this may caused the flyers but I'm hoping. ;D

I was annealing several of my Lapua brass due to stiff bolt lift after firing. I noticed that my groups tightened up BIG time but had flyers. Could be caused by my inconsistent annealing process of using my fingers to rotate the brass for x amount of time. :D

One thing for sure is that the stiff bolt dissappeared!