Quote Originally Posted by LongRange View Post
ive heard...but havent tried...sea foam works very well.



i dont have a bore scope but will make sure that patches are spotless after scrubbing for carbon/soot and copper with bronze brushes and bore foaming. then a little scrubbing with a nylon brush and alcohol to get the cleaners out and then 5 to 10 alcohol soaked patches to make sure its clean and to dry it up a little...i just cleaned to metal about 120 rounds ago so it shouldnt be to bad as the barrel has never really collected much of either.
if you dont mind can you tell me what you learned the hard way so if i run into any issues ill know what to watch for?
That's the first I've heard about using "Sea Foam", gotta give that a try. I use the stuff in my F-150 all the time to help keep the injectors clean.