I just received a ptg bolt-head and it doesn't have a notch cut out the part that goes into the bolt and locks it in. Is this the wrong bolt head or a mistake on there part. Will post pics when I figure out how
Older Savage rifles had an index lug in the bolt body that you'll need to remove in order to use the new bolt head.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Grind out the bolt body with a dremel.
After that, you'll just have to pay attention so you don't intall your bolt head upside down.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
May be an optical illusion but the old one looks like a long action and new one a short action going by the length of the tail.
"And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)
The baffle is on 1 and not on the other
I see you got yourself a Binford 3000 high speed rotory tool.
Thanks guys for the responses, my first thought was to grind it down. I figured I ask the question first though
Thanks guys for the advice, it fits like a glove now!
Great.
It's usually wise to ask before firing up the Savage accurizer (dremel).
While you were at it did you polish the cocking ramp, cocking pin, cocking sleeve as well as the primary extraction ramps?
I also looks like you were smart and put the wavy washer between the bolt lugs and baffle.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Bookmarks