Quote Originally Posted by short round View Post
OOPS. I meant to say ejector retaining pin hole looks to be to far forward in the bolt head.
I did some measuring and here's what I found. The hole for the retaining pin is farther forward on he PTG bolt head. It's .012" closer to the face than the factory one.

I also did some measuring on the ejectors. The retaining pin slot on the new style factory ejector measured .256" long. The SSS ejector pin slot measured .242". And the factory old style ejector out of my model 12 measured .206". So what I did was put the model 12 ejector into the ptg bolt head and I put the new style factory ejector in the model 12 and all is well.