I picked up a savage barreled action a couple years ago and just haven't had time to mess with it. It looks to be an older action in short action, the serial # is 260XX. The barrel is screwed in like a Remington with no barrel nut, which I assume the seller had done by a gunsmith. The factory screw spacing measures about 4.5 inches, but the previous owner had the action drilled and tapped for another action screw to make the spacing 5" I assume for a long action stock. I would like to use the original action screw spacing, because the screw doesn't thread in very far before it hits the barrel threads In the new hole that was put in the action. The only stock that I could find that was close to that spacing was from boyds. Here is a link to the stock http://www.boydsgunstocks.com/Produc...nate-semiinlet
Would this work for the action that I have, or are there better options out there that I just haven't found. Thanks for any help you all can provide.