I get 1.346, Boots.
I don't know about PTA's OD.
Anyone know the exact OD of the standard 10/110 action? I am at work and don't have one with me to measure.
Thanks.
Also a PTA action diameter if it is different.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
I get 1.346, Boots.
I don't know about PTA's OD.
Thanks fox. I'm working on a Lil project here on the cad program and I could not remember.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
PTA should be the same. 1.350" is the factory spec, but they usually fall short by a few thousandths as Foxx indicated.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Thank Jim. Figured they were the same but don't currently own a target action so wasn't sure.
Got a good start. Now I'll haft bring in a stock to get the rest of my measurements.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Bookmarks