Pm sent
I am looking for some recommendations on loads for a 6mms x 45 (6mms x 223). They will be for an model 11 trophy Hunter with an Apache barrel 1 in 9 twist, 24", varmint contour for coyote, chucks, etc (some paper punching too). Thanks for any help or direction you guys can give me.
Pm sent
Ya'll hang on I'm gonna drive closer
I like varget with 75gr sierra HP bullets and win primers.
John, What is your rate of twist?
1 in 9. Varmint72, how much Varget?
Last edited by neohiojohn; 12-07-2014 at 07:31 PM.
I'm using W-748 in both a 6x47 (6x222 Rem mag) and a 6 TCU (6x45 AI) with Rem 7 1/2 primers and 80 gr Hornady bullets.
12F, McGowen 6.5x284 1-8" twist, Nightforce 12-42x BR<br />BVSS, McGowen barrel, 22-250 1-9" twist, Nikon 6-18x<br />16 FHLSS Weather Warrior, Sinarms 257 Roberts, Pentax 3-9<br />Stevens 200, 223 bone-factory-stock, Nikon 3-9x<br />Scratch-built BVSS, LW 243 1-8" twist, Viper 6.5-20x50 mil-dot
I built my 6x45 in 2011. I run a 1/10" twist, 24" McGowan SS bbl and have had ZERO issues with any bullets from 55g to 95g.
I also have a BHW 22" SS p3 1/10" bbl and it shoots the same.
My go to powder for 55-70g is Exterminator and with 80-95g H335.
I settled on the above after many test rounds and chrony runs.
All these powders will work fine:
w748/h335/benchmark/varget/imr4198/h4198/aa2015/10x/x8208
I have way over 400 coyotes and 15 antelope to it and more paper targets that I can count.
Pushing 4k rounds and every load still goes under moa @ 100-400 yds....whats not to like!
6mm TC/U minimum loads would be a good starting point for the 6x45
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Here for all your 6x45 loads, 100s of actual tested loads:
http://www.predatormastersforums.com...1455558&page=5
Bookmarks