Results 1 to 25 of 40

Thread: 260 AI on a Long Action

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-30-2014, 11:43 AM #5
    Londerko
    Status
    Offline
    Thread Starter
    Basic Member
    Join Date
    Dec 2013
    Age
    39
    Posts
    245
    What is the difference between a 6.5-06AI and a 6.5-06A-squared? Does the A-squared mean something or is it just a 6.5-06?
    My whole idea behind putting a short action case in a long action is so I could load bullets VERY long and have it still be a repeater and increase case capacity. Why would a 260AI feed poorly and a 6.5-06AI feed well?
    Are your guys' 6.5-06a-squared and 6.5-06AI repeaters? Are you able to load your bullets to the lands and still have them fit in the magazine? That's what I'm going for with this build.
    -Leo
    Last edited by Londerko; 10-30-2014 at 11:48 AM. Reason: Typo
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Any tips to reinstalling long action blind magazine into action?
    By skoger in forum 110-Series Rifles
    Replies: 5
    Last Post: 12-24-2016, 11:58 AM
  2. Opening throat of long action for the long magnum cartridges
    By Three44s in forum 110-Series Rifles
    Replies: 8
    Last Post: 09-25-2016, 11:32 AM
  3. Question on building a 223 on a long action using a short action bolt head
    By floydboy in forum 110-Series Rifles
    Replies: 7
    Last Post: 11-13-2013, 07:11 PM
  4. Long Action/Short Action Bolt head swap questions
    By Darryle in forum 110-Series Rifles
    Replies: 5
    Last Post: 03-22-2010, 09:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules