thinkin its 6-48
Can someone tell me the thread size on the barrel of a !0FP that are used for scope mount bases? Is it 6/32 fine thread? Thanks
thinkin its 6-48
6-48
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Thanks guys! Need to cut off one too long screw(over barrel threads) that came with my EGW mount and like to use a nut on it when filing it down to chase the threads.
You'll never find a nut that size.
"As long as there's lead in the air....there's still hope.."
Sharpshooter- What would you recommend for me to do since I need to to remove about 1/16' or so off the end? I usually use an nut to chase the threads so the screw will start easy after carefully cutting and filing. Just want a good and easier start back into the receiver. Any suggestions? Thanks
I got a kit from brownells with those screws...
Simple and cheap....http://www272.pair.com/stevewag/scre...rewholder.html
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
I use a screw "gizzy"...I guess that's the official name. It's just a small flat bar with several tapped holes in it to hold the screw while you grind it. If you don't have one, I'd just use a pair of needlenose pliers and finish off with a file.
"As long as there's lead in the air....there's still hope.."
Thanks guys, I want to get this thing together today, so I can try it out soon.
Ok guys, I found a old drill gauge and was able to screw it in and I just filed it off. It worked just fine and rings and scope are now on rifle.
Bookmarks