Parts Needed:
1 - L/A stock inlet to accept DBM or HFP hardware
1 - L/A DBM bottom metal
1 - L/A DBM magazine box bottom plate
You would reuse your existing blind magazine box, follower, and follower spring as the magazine box bottom plate snaps right onto the bottom of your blind box.
This is ASSUMING that your rifle has the bottom bolt release on it (in front of trigger guard). If not, you will need to look into one of the aftermarket DBM setups like those offered by CDI Precision. Also note that the stock inlet is different for the aftermarket DBM hardware so you will need to talk to the manufacturer about who offers stocks inlet for their hardware or if they can inlet your existing stock for you (the latter probably wouldn't interest you due to the international shipping hassle).
Bookmarks