You will need a Boyd's Savage LA (111, 114, 116), Center Feed Stock with DBM inletting. You will need to order a plastic LA DBM frame assembly (surround) from Savage Arms Parts to get the Axis-style magazine with plastic bottom cap to latch into a wood stock. Savage started molding the DBM frame assembly into the Trophy Hunter plastic stock a couple of years ago to cut cost. You might also want to order a metal bottom bolt release trigger guard to replace the plastic one. The 1st picture below shows a Savage SA plastic DBM frame assembly (surround) in a wood stock with a metal bottom bolt release trigger guard.
If you want to switch to all metal bottom parts, you will need a METAL LA DBM frame assembly and METAL bottom cap. The latch system is different from the plastic Axis-style bottom parts. See 2nd picture which shows a metal SA frame assembly (surround) and metal bottom cap in a Boyd's Tacticool stock. I believe Jim a Northland Shooter Supply keeps most of these parts in stock if you want to give him a call.
Bookmarks