Quote Originally Posted by T-Rex
RKG

Thank you I hadn't thought of that. I had only neck sized the fire formed case used for the piece. In thinking of your idea, I loaded the case (w/o bullet) into the chamber w/ the bolt. I slid my cleaning rod down the bore until it touched the bottom of the inside of the case. I marked it w/ a piece of masking tape and pen. I then reinserted the case w/o the bolt. I held it in place w/ my finger and slid the rod down once more to the inside bottom of the case. It was the same spot on the masking tape as marked earlier. So I tried a previous mention of leaving the bullet long and using the bolt to seat to the lands. 2.806" +/- repeated 3 times. There we go. Thanks for the motivation.

Loaded up some 2.790" rounds at varying charges to test saturday.
That sounds more like it.