As long as they are snug I think you'll be okay. I'd check on them though to make sure they don't back out.
How many treads, turns, on an action screw do you need to hold the action properly. I got the Long screws from SSS (which were the same as the screws that came out of the Stevens) & I have 3 1/2 turns on the rear action screw & 4 on the front. Will this be enough in a stocky's thumb hole lame for a Stevens action. Putting a 250/300 AI barrel on it
As long as they are snug I think you'll be okay. I'd check on them though to make sure they don't back out.
Bookmarks