The .22 WMRF mags for model 93, are red plastic follower. That follower is a bit rakish on the last round out. It's a hard angle because its also for the 17hmr. The tip of the .22mag HP projectile can hang on the top face of the chamber. The original older metal followers don't do that. It's a simple fix. Just remove the red plastic peak, to be just above the feed lips. Then it feeds the last round flush. This is only on the .22 Wmr/17hmr mags used in a striker. Your experience may differ.
The older metal follower mags are from before 17hmr, and those 5 rd metal follower mags with a crease on the end cap feed .22mag totally perfectly.
Bookmarks