Sorry for the confusion. I got a 1x9 SS blank and turned it to .800 and machined it myself. Simple with the threaded head space adjustment they have once I got everything trued up.
Some of this borrowed from another post..
Dis-assemble the rifle down to the receiver / barrel group. Looking at the bottom of the receiver at the barrel end you must remove the stud which is used to hold the stock to the receiver and it also holds a magazine attachment part. Alongside of this stud are two Allen head screws that must be removed. These screws are used to lock the barrel in place. Lock the barrel in a vise using rubber around it to hold in place. The receiver will screw off with very little effort.
Apparently a little thread lock was on the threads of the barrel but there is no crush fit of the barrel to the receiver involved. The barrel thread is 20 tpi.
Removed barrel : http://i1240.photobucket.com/albums/...relremoved.jpg
Reply With Quote
Bookmarks