PTG is an option.
Your ejector parts will work fine, they are all the same, with a few exceptions in rare chamberings. Extractor parts are all the same now. The spring and ball detent are the same, I have found in some older models that extractor shape and detent locations slightly varied between bolt head sizes but in the newer ones (mid 90's on up IMH Experience) all are the same, or at least all the ones I have checked.
Remember that Long action bolt heads are different from the short action heads so you want one from a 30-06 based cartridge (25-06, 270, 30-06, etc.) due to the short action heads having a slightly shorter stem on them.
Bookmarks