I have a 6-06. No I would not do that. Do yoni have 6-06 reloading dies?
Let's say you do, if you have new brass 25-06 would work nicely. Run it through your 6-06 die with your die set to the bottom of your shell holder, with, just a little cam over. Take your new sized 6-06 brass double check for length.
Now you should be able to take your new case, and use it for your headspace gauge. It you have shim stock available, .002-.003 will work just fine. Use your new case gage for go place the shim stock in the bolt your headspace is set.
Bookmarks