I've had a Rifle Basix SAV-2 trigger on my F/TR rifle for about 1 1/2 years. It's seen close to 1000 rounds and is set about 16oz. I've always been happy with it, but now I have an issue.
With the safety in either the full safe position, or 1/2 safe position, the the rifle will fire if I apply pressure to the trigger and then release it. It won't fire while applying pressure, but fires the instant that pressure is released. Fortunately, I check these things on my rifles frequently. I don't have a trigger gauge, but it also seems to have gotten lighter recently. I've shot two F class matches since noticing the issue, but haven't had any issues with it when the safety is in the "fire" position. I have not tried a forceful closure of the bolt too seek a slam fire.
I'm thinking that the sear engagement may need some adjusting (as in more) but would like opinions. Watching the install video supplied did not help diagnose my issue.