As far as the swede goes, there is a turn and a no turn option, In my case I chose the latter, I would not own a chamber that the brass needs to be turned, I am not slamming turning brass, I just choose not to invest in the time or tooling, and in my case I want those necks as thick as possible, brass life is short enough, "in general terms" I don't need to be splitting necks on top of that, you can't ignore this round, it sends 105gr Amax's and 107gr Sierra HPBT at over 3500FPS without even breathing hard, it is only out done by my 6mm-06AI and my 6mm Mach IV, and do not forget all you need is a gutted 6.5 X 55 Swede FL die for the body, and a 6BR for the neck and shoulder, it is as simple as that. If I could only keep one 6mm that would be it.
Dean
Bookmarks