Quote Originally Posted by paul90 View Post
I haven't had feeding problems, just couldn't pull the trigger till the bottom metal was cut to fit around the trigger mechanism.

Their customer service is terrible.

How was your experience with their customer service?

Their customer service was awful. They never had any answers and they were rude.

I had to notch the trigger guard so the trigger would function as well. I didn't even mind that. What I do mind is that the mag drops almost a 1/4" after being inserted which causes the rounds to be driven directly into the feed ramp. There's no more room to inlet to make the bottom metal sit higher to compensate for the drop. If I push up on the mag after inserting it feeds great...I can only assume that the mag well was machined way to large or the notch for the mag catch is too low or too shallow.

Did I mention that the cheap little spring that puts tension on the mag catch popped out a dozen times?

Sometimes you get what you pay for, I guess.

....needless to say PTG doesn't care......