Quote Originally Posted by strut64 View Post
My 110 with accutrigger has been bothering me. Issues are;
* the trigger will release even with out the blade being depressed. This has me spooked.
* as a factory stock accurtrigger the pull can't be reduced below 2 1/2 lbs.
My questions are should I get the trigger weight spring or replace
with an aftermarket. I have looked at the Basix SAV-2. As background,
I have set this up with a Shilen 6 BR target barrel and After market Boyds Thumbhole
plus pillared and bedded the action.
1. The trigger can be released on all accutriggers if the trigger is activated without the safety being depressed, but the sear is designed to keep the firing pin from striking the primer. This is not uncommon, especially when people lighten the trigger pull too much.

2. Accutriggers need to have a certain amount of spring tension to hold the sears in place. I have seen, and done this myself, the trigger spring tension set too low and rapid bold engage or slight trigger pull will set off the trigger. Without the safety sear being depressed though I have YET to see an accidental mis-fire. Knock on wood.