Originally Posted by taylorce1
Not yet on my three with centerfeed mags...but there's always hope! ;D
Actually, two are still in the box unfired, a 14 and 114, but on the other 14( hinged mag) the floor plate inletting was just deep enough in the front to allow the mag set a little too high and the bolt would rub on it. A thin washer (spare part from a Rem 700 BDL) between the stock and floor plate took care of it.
It sounds as though you may be seeing the same issue. Try loosening the front action screw a turn or two to let the action move up away from the mag a bit and see if that cures it. If it does the next problem is how to fix it with the blind mag. Either the action would need to set a bit higher or the mag set a little deeper in the stock. I'm not sure which plan of abuse I'd try. ;D
Bill
Bookmarks