The answer is "maybe".
A combination of the smooth barrel nut wrench and heat from a torch might or might not work.
Is it physically possible to remove one of these without damaging them? Good thing I have extra barrel nuts!! LOL
The answer is "maybe".
A combination of the smooth barrel nut wrench and heat from a torch might or might not work.
NRA Life Member
I have the wrench but it's not getting the job done haha
Who the heck CARES?! Once I got mine off I chucked it in the trash! :)
It's almost humerus how hard they put te smooth barrel nuts on it's like savage doesn't want anyone to put a new barrel on
Lol time to get the cheater bar and torch!!!
Yep. You get that sucker off you won't be putting it back on. Just don't damage the barrel.
Fox there could possibly be a brand new 7-08 barrel in the classifieds once I get this dang thing off! Unless I decide to keep it
Last edited by Luke45; 07-03-2014 at 10:38 PM.
Ok the barrel came off, but the nut stayed on the barrel, the barrel just unscrewed and the nut didn't budge. Anyone had this happen before? I swear the nut feel like it's welded to the barrel
I have had that happen. wrapped a leather belt around the barrel, clamped a vise grip to it and laid it on the floor...
If that doesn't work, cut it off with a dremel. go easy so as to not cut all the way thru and hit the barrel. Mae a few cuts and it will eventually break away when twisting.
I finally got it off! Fox I ended up doing just that, I swear there was a teaspoon full of grease and metal debris between the barrel and the nut. This is a brand new rifle btw. I cleaned up the barrel and now a nut goes on there perfectly, I was worried the metal chunks where from te barrel or nut but it wasn't, I've taken barrels off of savages from te 80s and they were perfectly fine. Kinda sad
This is the first new savage I've taken apart, beside the debris in the barrel nut, the scope it came with was loose, one of the Allen screws on the base was stripped, the others loose, and the recoil lug was smaller diameter than the action. Are all new savages like this? The 4 I've built were all 80s and 90s and had superior workmsnsip
I'm looking for a small shank 7mm-08 sporter barrel.
Last edited by joeb33050; 07-04-2014 at 06:07 AM. Reason: I was told to, evidently I broke some rule.
Sorry moderators please don't ban us this was an accident, we did not mean to turn this into a classified add
Last edited by Luke45; 07-03-2014 at 10:39 PM.
Can put the older style barrel nut in place of the smooth ,once you get it off ?
Yep. That's why I say don't worry about the nut. It ain't worth the hassle. never known anyone to put one ON a rifle after taking it off.
works perfect,proceed as planed
I would advise against te smooth barrel nuts though, that one took me almost 45 min to get off vs. 30 seconds for the old style. And yes I threw the smooth one in the trash and put on an old style one
I have one to pull soon. Don't have the nipple wrench. Prolly go the heat n pipe wrench route. Dang things been on there since 69 or 70. It's coming off one way or another.
Bookmarks