Quote Originally Posted by 2footroper View Post
Got my stock back from the refinisher yesterday. Today I cleaned up all the interrior areas and mounted the action to the stock. I now have a problem with the rear most hole behind the trigger guard. It feels like it's going to strip out if I try to torque it at all. It is just threaded into the plastic of the stock and not machined into the action at all. Is this a big problem or should I not worry and snug it up? Any suggestions?

That screw only holds the rear of the guard, it doesn't need "torqued" until it strips the threads plus two turns! Just snug is "good'n nuff".

Bill