Results 1 to 6 of 6

Thread: deep seat amax?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #2
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    From jammed into the lands to as far back as you can go, information can be gained! :))

    Edit....but since you are new to reloading, concentrate on the basics first...start with book coal. Be safe. Then take a step up to a little more advanced reloading by playing with seating depth. Changing seating depth can change pressures, up and down. The safe way to do it is start at the bottom and work back up again, looking for pressure signs along the way.

    Good Luck.....Good Reloading :))........Jim
    Last edited by FW Conch; 06-02-2014 at 01:26 PM.

Similar Threads

  1. Anyone finding success seating amax deep??
    By alltherage in forum Ammunition & Reloading
    Replies: 16
    Last Post: 01-03-2017, 08:32 AM
  2. Easiest way to determine how far off the lands to seat?
    By Old Medic in forum Ammunition & Reloading
    Replies: 24
    Last Post: 11-08-2015, 12:02 PM
  3. how far to seat bullets?
    By yotehtr1 in forum Ammunition & Reloading
    Replies: 33
    Last Post: 09-11-2014, 08:04 AM
  4. 168 AMAX Seated Too Deep?
    By beartooth91 in forum Ammunition & Reloading
    Replies: 8
    Last Post: 12-25-2012, 01:12 PM
  5. really easy to seat primers....seated deep....dangerous?
    By teebirdhyzer in forum Ammunition & Reloading
    Replies: 5
    Last Post: 08-22-2011, 11:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •