Results 1 to 18 of 18

Thread: Run out, Hornady concenticity tool and Lee crimp

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 06-02-2014, 07:42 AM #2
    Vince
    Guest
    I don't crimp my rifle rounds but I do use my Hornady concentricity tool.
    Factory rounds are crimped and I've used the Hornady concentricity tool and adjusted cartridges with it. I'd try not crimping first and then using the Lee crimp die. I've found my best accuracy not crimping for bolt action rifles.
    Last edited by Vince; 06-07-2014 at 04:45 PM. Reason: typo
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. hornady hand primer tool
    By dangimissed in forum Ammunition & Reloading
    Replies: 0
    Last Post: 01-05-2013, 06:55 PM
  2. 110BA .338 Lapua Mag & Hornady COAL tool
    By Ole Silver in forum 110-Series Rifles
    Replies: 2
    Last Post: 08-06-2012, 08:16 AM
  3. Hornady Concentricity Tool
    By Luckus in forum Ammunition & Reloading
    Replies: 3
    Last Post: 05-18-2012, 12:14 PM
  4. Hornady OAL tool thread size?
    By pdog06 in forum Ammunition & Reloading
    Replies: 3
    Last Post: 06-25-2010, 11:31 PM
  5. Hornady Concentricity Tool
    By Balljoint in forum Ammunition & Reloading
    Replies: 14
    Last Post: 12-11-2009, 10:08 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules